Delta DRL-24V960W1EN 24V 960W 40A DIN Rail LYTE II Series

Model	Description
DRL-24V960W1ENA	Conformal Coating

Model	Description
DRL-24V960W1ENA	Conformal Coating

Download

Datasheet

Uploaded on 24-May-2026

Manual

Uploaded on 24-May-2026

Image

Uploaded on 25-May-2026

Mechanical Drawing

Uploaded on 25-May-2026

.DXF

Uploaded on 25-May-2026

.STP

Uploaded on 25-May-2026

Certificates

BSMI

Uploaded on 24-May-2026

CCC

Uploaded on 24-May-2026

EAC

Uploaded on 24-May-2026

TUV

Uploaded on 24-May-2026

UKCA

Uploaded on 24-May-2026

GUI Software

Tech Specs

Output Current

40A

Output Voltage

24V

Output Voltage Adjustment Range

24-28 Vdc

Output Power

960W

Line Regulation

± 0.5% @ 115 Vac & 230 Vac

Load Regulation

± 0.5%

PARD

< 150 mVpp @ 0°C to +70°C
< 450 mVpp @ -30°C to 0°C

Start-up Time

300 ms typ. @ 230 Vac

Hold-up Time

22 ms typ. @ 230 Vac

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 10% @ 115 Vac & 230 Vac input, 10-100% load (Slew Rate: 2.5 A/μS, 50% duty cycle @ 5 Hz & 10 kHz)

Start-up with Capacitive Loads

10,000 µF Max

Rise Time

30 ms typ. @ 230 Vac

Power Boost Duration

150% Power Boost for 5 seconds / 200% for 50ms / 500% for 5ms

Nominal Input Voltage

100-240 Vac

Input Voltage Range

85-277 Vac

Nominal Input Frequency

50-60 Hz

Input Frequency Range

47-63Hz

DC Input Voltage Range

100-400 Vdc

Input Current

9.3 A typ. @ 115 Vac, 4.6 A typ. @ 230 Vac

Efficiency at 100% load

95% typ. @ 230 Vac

Inrush Current

30 A typ. @ 230 Vac

Power Factor at 100% load

> 0.98 @ 115 Vac, > 0.96 @ 230 Vac

Leakage Current

1.5 mA typ. @ 230 Vac

No Load Power Consumption

4 W typ. @ 230 Vac

Case Chassis / Cover Case Cover: Aluminum alloy, Chassis: Anodized aluminum, Front Cover: Galvanized steel
Indicator Green LED DC OK
Cooling System Convection
Input Terminal 3 Pins (Rated 600 V / 30 A)
Output Terminal 4 Pins (Rated 600 V / 30 A)
Signal Terminal -
Noise Sound Pressure Level (SPL) Sound Pressure Level (SPL) < 25 dBA
Input/Output Terminal -
Signal -
Mounting Rail -
Wire Input: AWG 14-12 Output: AWG 12-10
Protection Structure -
Terminal -
Unit Weight (0.00 lb)	Dimensions 123.6 x 130.8 x 137 mm 4.87” x 5.15” x 5.39”

Vibration (Operating)

IEC 60068-2-6, Sine Wave: 10 Hz to 500 Hz (2G peak); 10 min per cycle, 60 min for X, Y, Z direction

Operating Temperature

-40°C to +70°C

Storage Temperature

-40°C to +85°C

Power De-rating

> 50°C de-rate power by 2.5% / °C @ 230 Vac
> 40°C de-rate power by 1.66% / °C @ 115 Vac

Operating Humidity

5 to 90% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, Half Sine Wave: 50 G for duration of 11 ms; 3 times per direction, 9 times in total

Vibration (Non-Operating)

IEC 60068-2-64, Random: 5 Hz to 500 Hz (2.09 G); 20 min per axis for all X, Y, Z direction

Operating Altitude

0 to 5,000 Meters (16,400 ft.)

Pollution Degree

Over Voltage Category

II (Compliance to EN 61558-1 OVC III with 2000 meters altitude)

Overvoltage

<37 V, SELV Output, Hiccup Mode, Auto-recovery

Overload / Overcurrent

125 - 205% of rated load current, Hiccup Mode, Auto-recovery (150% Power Boost for 5 seconds / 200% for 50 ms / 500% for 5 ms)

Over Temperature

Shut down, Auto-recovery

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Protection Against Shock

Class I with Primary Earth connection

MTBF

Telcordia SR-332: > 700,000 hrs.
I/P: I/P: 115 Vac & 230 Vac, O/P: 100% load, Ta: 25°C

Expected Cap Life Time

10 Years (115 Vac & 230 Vac, 50% load @ 45°C)

Safety Certificate

CB scheme: IEC/EN/BS EN 62368-1, AS/NZS 62368-1 RCM, IEC/EN 61010-1/2-201, IEC 61558-1/2-16, AS/NZS 61558-1/2-16 RCM
TUV Bauart: EN 62368-1
UL/cUL: UL 62368-1, CSA C22.2; UL 61010-1/-2-201, CAN/CSA-C22.2 No. 61010-1-12
BIS: IS 13252-1 (Part 1)
BSMI: CNS 15598-1
CCC: GB 4943.1, EAC: TP TC 004/2011
KC: KC 62368-1 (upon request)

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 4.0 kVac
Input to Ground: 2.5 kVac
Output to Ground: 1.5 kVac

Safety Entry Low Voltage

SELV (IEC/EN 62368-1 /61010-1/2-201 /61558-1/2-16)

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091

Emission

(CE & RE)
CISPR 32, EN/BS EN 55032, AS/NZS CISPR 32, Class B; KS C 9832; CNS15936; EN/BS EN 61204-3; Compliance to FCC Title 47

Immunity

EN/BS EN 55035; KS C 9835; EN/BS EN 61204-3

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3, dmax ≤ 4%

(/3) Item(s) selected

DRL-24V960W1EN

DIN Rail

LYTE II Series

DRL-24V960W1EN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

Unit Weight

Highlights & Features

Applications

DRL-24V960W1EN

DRL-24V960W1EN

DIN Rail

LYTE II Series

DRL-24V960W1EN

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

DRF-12V120W1PBA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

124.2 x 30 x 117.1 mm

4.89” x 1.18” x 4.61”

DRC-24V015W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 18.0 x 55.0 mm

3.44” x 0.71” x 2.17”

DRL-48V960W3EN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

123.6 x 110 x 142.6 mm

4.87” x 4.33” x 5.61”

DRL-48V240W3EN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

123.6 x 56 x 116.8 mm

4.87” x 2.20” x 4.60”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter