Industrial Power
Click the link below to download the file.
Get your files as below link
Dowload link
36V
349.2W
9.7A
90-132Vac, 180-264Vac (Selectable by Switch)
215 x 115 x 30 mm
8.46” x 4.53” x 1.18”
0.833 kg (1.84 lb)
| Model | Description |
|---|---|
| PMT-36V350W2BM | UL/EAC approval |
36V
349.2W
9.7A
90-132Vac, 180-264Vac (Selectable by Switch)
215 x 115 x 30 mm
8.46” x 4.53” x 1.18”
0.833 kg (1.84 lb)
| Model | Description |
|---|---|
| PMT-36V350W2BM | UL/EAC approval |
|
Output Current
9.7A
|
|
Output Voltage
36V
|
|
Output Voltage Range
|
|
Output Voltage Adjustment Range
32.4-39.6Vdc
|
|
Output Power
349.2W
|
|
Output Current Adjustment Range
|
|
Max Output Voltage
|
|
Buffering Time
-
|
|
Line Regulation
± 0.5% typ. @ 100-132Vac, 180-264Vac (Selectable by Switch)
|
|
Load Regulation
±0.5% typ. @ 100-132Vac, 180-264Vac (Selectable by Switch)
|
|
PARD
< 200mVpp @ 0°C to 70°C
600mVpp typ. @ -30°C to 0°C |
|
Start-up Time
1500ms typ. @ 115Vac & 230Vac
|
|
Hold-up Time
20ms typ. @ 115Vac & 230Vac
|
|
Dynamic Response (Overshoot & Undershoot O/P Voltage)
± 10% @ 115 & 230Vac input, 10-100% load (Slew Rate: 2.5A/μS, 50% duty cycle @ 5Hz & 10KHz)
|
|
Start-up with Capacitive Loads
3,000µF Max
|
|
Remote ON/OFF
-
|
|
Protective Device
-
|
|
Voltage Drop Between Input and Output
-
|
|
Residual Ripple/PARD (20MHz)
-
|
|
Residual Ripple
-
|
|
Max. Power
-
|
|
Ripple & Noise
-
|
|
LED System Voltage Range in CC Mode
-
|
|
Rise Time
30ms typ. @ 115Vac & 230Vac
|
|
Power Boost Duration
-
|
|
Power Boost Recovery Time
-
|
|
Peak Power
-
|
|
Nominal Input Voltage
100-120Vac, 200-240Vac (Selectable by Switch)
|
|
Input Voltage Range
90-132Vac, 180-264Vac (Selectable by Switch)
|
|
Max Input Voltage
-
|
|
Nominal Input Frequency
50-60Hz
|
|
Input Frequency Range
47-63Hz
|
|
Nominal DC Input Voltage
|
|
DC Input Voltage Range
127-375Vdc
|
|
Input Current
6A typ. @ 115Vac, 3.4A typ. @ 230Vac
|
|
Input Power (Standby Mode)
-
|
|
Efficiency at 100% load
88% typ. @ 230Vac
|
|
Inrush Current
60A typ. @ 230Vac (Cold Start)
|
|
Charging Time
-
|
|
Power Factor at 100% load
-
|
|
Leakage Current
< 0.75mA @ 240Vac/50Hz
|
|
Nominal Current
-
|
|
Total Harmonic Distortion
-
|
|
Power Dissipation
-
|
|
Efficiency @ 10% load
-
|
|
Case Chassis / Cover
SGCC
|
|
|
Indicator
Green LED (DC OK)
|
|
|
Cooling System
Force Cooling
|
|
|
Input Terminal
-
|
|
|
Output Terminal
-
|
|
|
Signal Terminal
-
|
|
|
Noise Sound Pressure Level (SPL)
-
|
|
|
Input/Output Terminal
-
|
|
|
Signal
-
|
|
|
Mounting Rail
-
|
|
|
Wire
AWG 18-12
Current rating can refer to page 6 “Wire AWG Table” |
|
|
Protection Structure
-
|
|
|
Terminal
-
|
|
|
Unit Weight
0.833 kg (1.84 lb)
|
Dimensions
215 x 115 x
30 mm
8.46” x 4.53” x 1.18” |
|
Vibration (Operating)
IEC 60068-2-6, Sine Wave: 20Hz to 500Hz (5G); 10min per cycle, 60min for each axis (X, Y,Z)
|
|
Shock Test (Operating)
IEC 60068-2-27, Half Sine Wave: 10G for a duration of 11ms, 3 shock for each 3 directions.
|
|
Operating Temperature
-40°C to +70°C
|
|
Storage Temperature
-40°C to +85°C
|
|
Power De-rating
> 50°C de-rate power by 2% / °C
< < 100Vac de-rate power by 2% / V (80% load @ 90Vac) |
|
Operating Humidity
20 to 90% (Non-Condensing)
|
|
Shock Test (Non-Operating)
IEC 60068-2-27, Half Sine Wave: 50G for a duration of 11ms, 3 shocks for each 3 directions
|
|
Vibration (Non-Operating)
IEC 60068-2-6, Random: 5Hz to 500Hz (2.09G); 20 min per axis for all X, Y, Z direction
|
|
Storage Humidity
-
|
|
Operating Altitude
0 to 5,000 Meters (0 to 16,400 ft)
|
|
Pollution Degree
2
|
|
Bump Test (Operating)
-
|
|
Over Voltage Category
II
|
|
Corrosion
-
|
|
Acoustic Noise
-
|
|
Overvoltage
39.6V-48.6V SELV Output, Latch Mode
|
|
Overload / Overcurrent
110-175% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)
|
|
Over Temperature
Latch Mode
|
|
Short Circuit
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)
|
|
Reverse Polarity Protection
-
|
|
Degree of Protection
-
|
|
Protection Against Shock
Class I with PE*6connection
|
|
Input Polarity Protection
-
|
|
Battery Polarity Protection
-
|
|
Wrong Battery Voltage Protection
-
|
|
Deep Discharge Protection
-
|
|
Overload
-
|
|
Overcurrent
-
|
|
Internal Fuse
-
|
|
Insufficient Input Voltage Protection
-
|
|
MTBF
> 700,000 hrs as per Telcordia SR-332 I/P: 230Vac, O/P: 100% Load, Ta: 25°C)
|
|
Expected Cap Life Time
10 years (230Vac, 50% load @ 40°C)
|
|
Safety Certificate
-
|
|
Electrical Safety
PMT-24V350W2BR:
TUV Bauart: EN 62368-1 UL/cUL: UL 62368-1, and CAN/CSA C22.2 No. 62368-1 CB scheme: IEC 62368-1, IEC 60950-1 KC: K 60950-1 EAC: TP TC 004/2011 BSMI: CNS 14336-1 BIS: IS 13252 (Part 1) CCC: GB4943.1 PMT-24V350W2BM: UL/cUL: UL 62368-1, and CAN/CSA C22.2 No. 62368-1 CB scheme: IEC 62368-1, IEC 60950-1 EAC: TP TC 004/2011 CQC: GB4943.1 |
|
CE
In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
This power supply does not comply with the harmonic current emission requirements specified in BS EN/EN61000-3-2. Please ensure it is not used in applications where compliance with this standard is required. |
|
Medical Safety
-
|
|
Galvanic Isolation
Input to Output: 3.0 KVac
Input to Ground: 2.0 KVac Output to Ground: 0.5 KVac |
|
Industrial Control Equipment
-
|
|
Hazardous Location / ATEX
-
|
|
II 3 G ATEX 2014/34/EU
-
|
|
Electrical Equipments of Machines
-
|
|
Electrical Equipment for Use in Electrical Power Installations
-
|
|
Safety Entry Low Voltage
SELV
|
|
Maritime
-
|
|
Material and Parts
-
|
|
Isolation Resistance
-
|
|
PE Resistance
-
|
|
UKCA
In conformance with Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016
|
|
Certificates for Other Countries
-
|
|
BIS
-
|
|
KC
-
|
|
Electrical Equipment for Measurement, Control, and Laboratory Use
-
|
|
ITE Safety
-
|
|
SIL3
-
|
|
Emission
(CE & RE)
CISPR 32, EN/BS EN 55032, EN/BS EN 61000-6-4, KN32, AS/NZS CISPR32 Compliance to FCC Title 47, EN/BS EN 61000-6-3 : Class B |
|
Immunity
EN/BS EN 55035, KN35, EN/BS EN 61000-6-2 & Compliance to EN/BS EN 61000-6-1
|
|
Harmonic Current Emissions
-
|
|
Voltage Fluctuation and Flicker
-
|
|
ESD Immunity
-
|
|
Radiated Immunity
-
|
|
EFT
-
|
|
Surge
-
|
|
Conducted Immunity
-
|
|
Magnetic Field
-
|
|
Voltage Dips
-
|
|
Component Power Supply for General Use
-
|
36V
1000W
28A
90-264 Vac
24V
2500W
0-104.2A
85-264 Vac
48V
1500W
31.25A
90-264 Vac
12V
720W
60A
90-264 Vac
Subscribe to DeltaPSU newsletter and be the first to know about our new product releases and industry knowledge. Read our Privacy Policy.
DeltaPSU will use the information you provide on this form to be in touch with you.
To unsubscribe, click the link in our newsletter. We will treat your data with respect.