PJ-12V100WDRA

Open Frame

PJ Series

PJ-12V100WDRA

Output Voltage

12V

Output Power

102W

Output Current

8.5A

Input Voltage Range

85-264Vac

Dimensions (L x W x H)

155 x 62 x 27 mm (Open Frame)
185 x 72 x 45 mm (Enclosed)
6.10" x 2.44" x 1.06" (Open Frame)
7.28" x 2.83" x 1.77" (Enclosed)

Unit Weight

0.22 kg (0.49 lb) (Open Frame)
0.38 kg (0.84 lb) (Enclosed) (0.49 lb)

Highlights & Features

200% power boost
Comply with JAPAN DEN-AN
Built-in remote ON/OFF
Low profile design
Low inrush current / low leakage current
High efficiency and power factor to conserve energy
Conforms to harmonic current IEC/EN/BS EN 61000-3-2, Class A
Conformal coating on PCBA to protect against chemical and dust pollutants
Versatile configuration options: Open Frame & Enclosed

Optional Models

Model	Description
PJ-12V100WERA	Enclosed, remote ON/OFF

Applications

Download

Datasheet

Uploaded on 29-Dec-2025

Image

Uploaded on 05-Jan-2026

Mechanical Drawing

Uploaded on 26-Dec-2025

.DXF

Uploaded on 26-Dec-2025

.STP

Uploaded on 26-Dec-2025

Certificates

Uploaded on 26-Dec-2025

TUV

Uploaded on 26-Dec-2025

UKCA

Uploaded on 26-Dec-2025

GUI Software

Tech Specs

Output Current

8.5A

Output Voltage

12V

Output Voltage Adjustment Range

10.8-13.2Vdc

Output Power

102W

Line Regulation

+/- 0.5%

Load Regulation

+/- 0.5%

Start-up Time

500ms typ. @ 100Vac (100% load)

Hold-up Time

30ms typ. @ 100Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 0-50% load and 50-100% load
(Slew Rate: 2.5 A/μS, 50% duty cycle @ 5 Hz & 10 KHz)

Start-up with Capacitive Loads

8,000µF Max

Nominal Input Voltage

100-240Vac

Input Voltage Range

85-264Vac

Nominal Input Frequency

50-60Hz

Input Frequency Range

47-63Hz

DC Input Voltage Range

120-373 Vdc

Input Current

1.35 A typ. @ 100 Vac
0.55 A typ. @ 200 Vac

Efficiency at 100% load

89% typ. @ 100Vac,
91% typ. @ 200Vac

Inrush Current

15A typ. @ 100Vac,
30A typ. @ 200Vac

Power Factor at 100% load

0.99 @ 100Vac,
0.98 @ 200Vac

Leakage Current

0.2mA @ 100Vac,
0.4mA @ 240Vac

Case Chassis / Cover SGCC
Indicator -
Cooling System Convection
Input Terminal JST B3P5-VH (LF)(SN)
Output Terminal JST B8P-VH (LF)(SN)
Signal Terminal -
Noise Sound Pressure Level (SPL) < 25dBA
Input/Output Terminal -
Signal -
Mounting Rail -
Wire AWG 22-18
Protection Structure -
Terminal -
Unit Weight 0.22 kg (0.49 lb) (Open Frame) 0.38 kg (0.84 lb) (Enclosed) (0.49 lb)	Dimensions 155 x 62 x 27 mm (Open Frame) 185 x 72 x 45 mm (Enclosed) 6.10" x 2.44" x 1.06" (Open Frame) 7.28" x 2.83" x 1.77" (Enclosed)

Vibration (Operating)

IEC 60068-2-6, Sine Wave:10 Hz to 500 Hz @ 2G;
10 min period, 60 min per axis for all X, Y, Z direction

Operating Temperature

-40°C to +70°C

Storage Temperature

-40°C to +85°C

Power De-rating

Refer to datasheet (Engineering Data Fig.1.1~Fig.1.5 on Page8~10)

Operating Humidity

5 to 90% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, Half Sine Wave 50G,11 ms, 3 shocks X, Y, and Z direction

Operating Altitude

0 to 5,000 Meters (16,400 ft)

Pollution Degree

Over Voltage Category

Overvoltage

13.8-16.8V, Latch Mode

Overload / Overcurrent

> 201% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)

Over Temperature

Latch Mode

Short Circuit

Hicc-up Mode, Non-Latching (Auto-Recovery when the fault is removed)

Protection Against Shock

Class I with Primary Earth connection

MTBF

> 700,000 hrs. as per Telcordia SR-332

Expected Cap Life Time

10 years (100 Vac, 50% load @ 40°C)

Electrical Safety

TUV Bauart: EN 62368-1 UL/cUL recognized: UL 62368-1 and CSA C22.2 No. 62368-1
CB scheme: IEC 62368-1
Design to meet DENAN at 100 Vac

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 3.0 KVac
Input to Ground: 2.0 KVac
Output to Ground: 1.25 KVac

Safety Entry Low Voltage

SELV

UKCA

In conformance with Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016

Emission

CISPR 32, EN/BS EN 55032, Comply with FCC Title 47: Class B

Immunity

EN/BS EN 55035

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2, Class A & Class D

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

(/3) Item(s) selected

PJ-12V100WDRA

Open Frame

PJ Series

PJ-12V100WDRA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

Unit Weight

Highlights & Features

Applications

PJ-12V100WDRA

PJ-12V100WDRA

Open Frame

PJ Series

PJ-12V100WDRA

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

PJ-24V150WDRA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

160 x 75 x 27 mm (Op

MEP-500A48J BRA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

127.0 x 76.2 x 33.1 mm

5.00” x 3.00” x 1.30”

PJ-48V150WDRA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

160 x 75 x 27 mm (Op

MEP-600A24J BRA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

127.0 x 76.2 x 39.0 mm

5.00” x 3.00” x 1.54”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter